104 LOH Loss of Head Transmitter

It measures Loss of Head (LOH) in the gravity filter beds of Water Filtration plants or Traveling water screens in raw water treatment plants. Loss of head is measured by monitoring the level in High Pressure and low pressure side of the gravity filter/traveling water screen and showing the difference in these two levels.
  • Low cost solution.
  • 4-20 mA - Two wire transmitter.
  • Maintenance Free.
  • No calibration at site except for Zero & span setting.
  • Arrangement for recalibration if required.
  • Quick and easy installation.
  • Self diagnostic function: Error messages on display.
  • PROTECTION: All entries are protected through Password in EEPROM.
  • Provision of a nozzle to clean the probe without dismantling the probe.
  • Alarm on Loss Of Head using Optional Indicator (96X96).
Enclosure Weatherproof IP 65,Cast Aluminium polyurethane painted.
Display 6 digit LCD display
Display Range 0- 9999 mm with adjustable Decimal Point. (Std.0-100%)
Calibration Possible through front panel keypad
Accuracy +/- 2% of Electrode Length
Temperature 60° C (Max.)
Pressure Atmospheric
Output 4-20 mA DC proportional to Loss of Head
Power Supply 24 VDC ±10%
Surge Protection In Built
PROBE UNIT  
Number of Electrodes Two identical electrodes. One each for High & Low pressure.
Electrode Material PTFE Wrapped SS cable
Outer Pipe (Still Well) SS 304
Maximum Length 2700 mm (Std.)
4000 mm (Optional)
Temperature 60° C
Pressure Atmospheric
Enclosure IP 65, Cast Aluminium polyurethane painted.
Cable between Probe & Indicator 5 CoreX 1.5 Sq.mm. shielded cable with Max.distance between probe and indicator100 m.
  • Water Filter Beds in Water Treatment Plants.