104 ROF Rate of Flow Transmitter

104 ROF is Rate of Flow indicator for open channel Flow measurement. It utilizes SBEM’s proven capacitance probes with low power Microprocessor based Electronics to give an excellent low cost solution for low measurement in an open channel with Weirs or flumes.
  • Low cost solution.
  • Easy Calibration.
  • Maintenance Free.
  • Level to Flow conversion using a linearizer with up to 600 points.
  • Higher accuracy of Flow with multipoint calibration.
  • EASY TROUBLESHOOTING:Self Diagnostic function i.e. Error Messages on display.
  • PROTECTION: All entries are protected through password in EEPROM.
  • DIGITAL READOUT: Digital LCD display of Flow rate & Level.
  • Provision of a nozzle to clean the probe without dismantling the probe.
Enclosure Weatherproof IP 65,Cast Aluminium polyurethane painted.
Location Safe Area
Temperature 0 to 60°C
Humidity 0-95 % max. (non condensing)
Display 6 digit LCD display
Display Range Level = 0- 1200 mm. (Max.)
Flow = 0 - 99999 m /h (with adjustable decimal point)
Accuracy +/- 2% of FSD
Output 4-20 mA, with max. load 500 ohm at 24 V dc
Power Supply 24 VDC ±10%
Calibration Possible through front panel keypad
PROBE UNIT  
Electrode Material PTFE Wrapped SS cable
Outer Pipe (Still Well) SS 304
Maximum Length 1500 mm
Temperature 60° C
Pressure Atmospheric
Zero Elevation Up to 80% of electrode length
Dead Length Min. 50 mm from bottom of electrode
Enclosure IP 65, Cast Aluminium polyurethane painted.
  • Inlet / Outlet of Filter house / Beds
  • Effluent Treatment Plants
  • Water Treatment Plants