104 ROF Rate of Flow Transmitter
104 ROF is Rate of Flow indicator for open channel Flow measurement. It utilizes SBEM’s proven capacitance probes with low power Microprocessor based Electronics to give an excellent low cost solution for low measurement in an open channel with Weirs or flumes.
- Low cost solution.
- Easy Calibration.
- Maintenance Free.
- Level to Flow conversion using a linearizer with up to 600 points.
- Higher accuracy of Flow with multipoint calibration.
- EASY TROUBLESHOOTING: Self Diagnostic function i.e. Error Messages on display.
- PROTECTION: All entries are protected through password in EEPROM.
- DIGITAL READOUT: Digital LCD display of Flow rate & Level.
- Provision of a nozzle to clean the probe without dismantling the probe.
| Enclosure | Weatherproof IP 65,Cast Aluminium polyurethane painted. |
| Location | Safe Area |
| Temperature | 0 to 60°C |
| Humidity | 0-95 % max. (non condensing) |
| Display | 6 digit LCD display |
| Display Range | Level = 0- 1200 mm. (Max.) |
| Flow = 0 - 99999 m /h (with adjustable decimal point) | |
| Accuracy | +/- 2% of FSD |
| Output | 4-20 mA, with max. load 500 ohm at 24 V dc |
| Power Supply | 24 VDC ±10% |
| Calibration | Possible through front panel keypad |
| PROBE UNIT | |
| Electrode Material | PTFE Wrapped SS cable |
| Outer Pipe (Still Well) | SS 304 |
| Maximum Length | 1500 mm |
| Temperature | 60° C |
| Pressure | Atmospheric |
| Zero Elevation | Up to 80% of electrode length |
| Dead Length | Min. 50 mm from bottom of electrode |
| Enclosure | IP 65, Cast Aluminium polyurethane painted. |
- Inlet / Outlet of Filter house / Beds
- Effluent Treatment Plants
- Water Treatment Plants